How to Mount a Wall Mounted Medicine Cabinet?

In modern homes, a wall-mounted medicine cabinet serves not only as a storage space but also as a source of neatness and beauty. Whether it is a bathroom, toilet, or small washroom, a well-designed and firmly installed medicine cabinet not only enhances the overall aesthetic of the space but also effectively manages daily necessities and medications. However, for many people, installing a medicine cabinet is a task that only professionals are qualified to complete. As long as you master the correct methods and tools, even beginners can easily complete the installation work.

 

This article provides a detailed installation guide from scratch, covering tool preparation, installation steps, precautions, and solutions to common problems, to help you complete the installation of a wall mounted medicine cabinet.

 

1. Preparation before starting: Tools and measurements

Required tools:

Before formal installation, it is recommended to prepare the following tools:

v Electric drill or screwdriver

v Level

v Tape measure or laser rangefinder

v Pencil or marker

v Wall anchors

v Screws of appropriate length

v Protective gloves and goggles (recommended)

 

Confirm the installation location:

Before installing the medicine cabinet on the bathroom wall, you first need to determine the appropriate location of the cabinet. It is usually recommended that:

Ø The bottom of the cabinet is approximately 12-16 inch from the surface of the sink.

Ø The centre height of the cabinet is maintained at approximately 59-63 inch for daily use..

Ø Avoid installing in areas with dense water pipes and wires (it is recommended to use a wall detector for detection)

 

2. Marking positioning: accurately determine the drilling position

ü Use a tape measure and pencil to measure the position of the hanging hole on the back of the medicine cabinet.

ü Place the cabinet at the designated installation location and use a level to ensure it remains level.

ü Mark the corresponding hole positions on the wall. It is recommended to use a small nail to dot as a preliminary guide lightly.

✅ Tips: When operating on a tile wall, use a glass drill bit and drill at a low speed to avoid cracking the tile.

 

3. Drilling and wall anchoring

Depending on the wall material, the drilling method is slightly different:

n Drywall: Use plastic or metal expansion anchors.

n Solid cement or brick wall: Use expansion bolts or expansion tubes.

n Tile wall: First, drill through the tile at a low speed, and then continue drilling deeper holes.

 

After drilling, drive the anchor into the hole to ensure it is securely in place.

 

4. Install the medicine cabinet body

u Align the holes and fix the medicine cabinet against the wall.

u Use screws to screw into the anchors and tighten them one by one. You can fix them from bottom to top to keep the force balanced.

u Use the level ruler again to calibrate whether the medicine cabinet is level. If you find that it is tilted, you can fine-tune the hole position or use a gasket to adjust it.

The internal installation structure of some medicine cabinets may block the screw holes. The cabinet door can be temporarily removed and reinstalled, and then replaced after completion.

 

5. Install cabinet doors and accessories

If the medicine cabinet is designed with mirror doors, pay attention to the following points:

 Install the mirror door slowly to avoid collision..

 Use the hinges or door shafts provided by the manufacturer to ensure smooth opening and closing..

 Adjust the door gap to keep the door vertical and without shaking..

 Additionally, some medicine cabinets come with internal shelves that can be adjusted in height after installation to accommodate various items in categories.

 

6. Safety inspection and daily maintenance

After installation, it is recommended to perform the following inspections:

l Manually shake the medicine cabinet to confirm whether it is stable..

Test whether the cabinet door opens and closes smoothly.

l Check whether any remaining screws are not tightened or if the holes are loose.

l If you need to place heavy items (such as glass bottles or first aid kits) inside the medicine cabinet, ensure that the screws and anchors are sufficient to bear the weight.

 

During daily use, keep the medicine cabinet dry and clean to avoid rust or loose structure caused by moisture. Check the screws regularly to ensure they are tight. If they are found to be displaced, they should be adjusted and reinforced immediately.

 

7. Frequently Asked Questions (FAQ)

①　What if the wall is uneven?

Ø You can use gaskets to make fine adjustments on the back of the cabinet to ensure the overall level is correct after installation.

②　What if you can't find the screw fixing point?

Ø You can choose to use longer screws and strong anchors for reinforcement, or use brackets to assist in fixing.

③　Can it be installed by one person?

Ø It is recommended that at least two people work together, with one person supporting the medicine cabinet and the other person drilling and fixing it, which is safer and more efficient.

④　Can it be disassembled and moved?

Ø Yes, but you need to drill new holes and fill the old ones to ensure that the wall at the new location is solid and intact.

 

8. Summary

Installing a wall-mounted medicine cabinet is not as complicated as you think. As long as you are well-prepared in advance and have all the necessary tools, follow the steps steadily, and confirm that each step is accurate, you can easily complete it even if you are doing it for the first time.

Through this guide, you have mastered the entire process, from selecting the installation location to drilling and fixing, and finally, the final safety check. This not only saves the cost of hiring someone to install, but also brings a sense of accomplishment in creating a living space by yourself.

Don't hesitate any longer, let us install your medicine cabinet!